Split Sirius Antenna Signal for Further Distribution
Two-Way Passive Satellite Radio Splitter Coupler Kit
Product Overview:
This kit includes the splitter and two cables to permit operation from a
single antenna of two SR-4 splitters connected to multiple (up to eight)
satellite radios. The loss of this passive splitter at 2.35 GHz is
compensated by the excess gain (8 dB min) of the SR-4. The resulting 8-way
network exhibits a gain of 3.5 dB (minimum).
This Coupler is optimized for use with Satellite Radio Commercial Services®
Splitter Model SR-4 for use in configuring 8-way splitter networks. This
splitter is power passing on all ports (in both directions) and is not
recommended for use as a two-way independent splitter, as damage to the
radios wil result. It is designed only for use in combining other diode
protected splitters (such as the SR-4) which are connected to the radios and
prevent cross coupling of the DC bias voltages at the output of each radio.
This coupler when used with two SR-4 splitters will permit RG-6 cable runs
from the SR-4 output to the radio of 30 feet. To extend these cable runs,
place a Pixel Model SBA-1 line amplifier at the input of the SRSC-2 coupler.
For example on amplifier will permit cable runs of up to 150 feet.
Please Note: This is not a splitter, it is a coupler. Please see our
2 Way
Splitter Kit User Guide if further instruction is needed.
Product Features:
Splitter Loss at 2.335 GHz
-4.5 dB max
Operating Temperature
Will operate outdoors or indoors over a temperature
range of - 40 degrees C to + 60 degrees C
DC power passing
DC power passing, all ports, both directions (no
diode protection)